Argonath RPG - A World of its own
Argonath RPG Community => Speakerbox => Topic started by: Watti on October 29, 2007, 09:40:14 am
-
Day 1
I Helped Finsh And Clean The First house :) i also Made a gate, i Put the Scaffolding up Around the First House... And i helped Cut the Molding I Nailed the Running Blocks :) 8 Hours of work :)... Fun!!
Day 2
Started House 2 :) Put the Frames Up... Put Braces up Connected the Cyclone Bolts Screws all that
i cleaned a Little... And i was out in the Sun working for 7 and a Half Hours Lifting.. Moving... Screwing or cleaning or Bashing :)
Day 3
Umm Put Struts Up.. All that... Realy thats it
Day 4
WOW!! Today Was the Best!!... umm I got a Nail bag.. and a Pressurized nail gun... and he Siad.. nail these brakets on Struts so on... and so i did
and there is 2 Bangs to it... 1 for Nail going KAPOW! into the Wood and The air GOnig Woooosh!!.. in a small second... on my third nail i thought i nailed my Finger
went Bang
OH FUCK!... then he went What Happend.. Oh thought i nailed my Finger.. but the recoil hit it.. Like it went back then forward
Day 5
Knock Off 1130 YEAH BABY!!...
Paid 150$
I cut my Finger open.. Stanly knife. xD... My Knob almost got Nailed.. by a Nail... One of the Guys Was Nailing wood... and he Missed and im Like OMG something hit me.. *Looked Down* HOLY FUCK! i had a Nail in my Pants... And he stated Laughing So hard he could work any More.. then about 20 minutes Later i finished Putting the Paper up and then We went Home :) not much today...
-
Nice but what is that for?
Diary?
-
Telling you guys what im doing...
-
Aight now i understand it :D
-
Where are you working? :trust:
-
Where are you working? :trust:
Doll house factory? :D
-
:hah: good luck watti, last year on my work experiance, i worked in 'Mercedes Benz' in the mechanic's place, the guy left the car engine on, and i acidentally messed about with the gearstick and he was facing the opposite wall.. and the car was an automatic, so when it went into drive ( i never been in an automatic car before, i didn't know what i was doing) the car rammed into the back of him and pinned him up against the wall :pop:
he was ok i guess, he only had like a fractured leg and stitches to get on his legs, and he got a claim off my school for like £20000 ( i hate my school so :hah: :hah: )
-
:hah: good luck watti, last year on my work experiance, i worked in 'Mercedes Benz' in the mechanic's place, the guy left the car engine on, and i acidentally messed about with the gearstick and he was facing the opposite wall.. and the car was an automatic, so when it went into drive ( i never been in an automatic car before, i didn't know what i was doing) the car rammed into the back of him and pinned him up against the wall :pop:
he was ok i guess, he only had like a fractured leg and stitches to get on his legs, and he got a claim off my school for like £20000 ( i hate my school so :hah: :hah: )
I bet your in trouble.
xD
KTHX!
Mike :D
-
im Working at Andrew Gatt's Homes.. and We are building for Brent Holmes...
Updated Day 2
-
Work experience: none
-
:) i might get an Aprentiship outa this :))
Posted on: November 01, 2007, 16:54:40
Updatd 3 and 4
-
Hehe i enjoyed reading keep up the good work ;)
-
Just a question, Houses made of wood? :trust:
-
Do you get paid?
-xcasio
-
Once when i worked in Taiwan in a levis factory. Dont ask me how i ended up there, cause i really dont know!
So, the first days was aight, even tho i didnt know the language, i still communicated with hand signs. Amazingly the dudes there can read my MS-13 gang signs, but i was beefin with some bloods and crips, cause them dudes was frontin in the cafiteria. But what i wanted to say about my "Work Experience" is that, one day i was making the 504 slim and some dudes fighting four soing machines away from me. I join them, cause them the bloods and crips i was beefin with. Over there? they crazy like fuc*, they throwin with chairs and unfinished pants(waste of good levis). All of sudden in the brawl this fork lifter flying towards me, so i quickly follow my instinct and do a action roll to the side, and the fork lift hit the manager. Now i own the spot, but i still live in Denmark..
-
I'm guessing your working for some kind of Building contractors. what do they do ? are they a specific contractor ? like loft conversions / extensions or all sorts?
Oh by the way its Struts not "stut"
-
Shit thanks.. :)... Well i was close.. :)
Posted on: November 02, 2007, 13:41:16
Just a question, Houses made of wood? :trust:
No There Made of Shit...
What do you think there made of?
-
Shit thanks.. :)... Well i was close.. :)
Posted on: November 02, 2007, 13:41:16
No There Made of Shit...
What do you think there made of?
concrete and bricks like real houses, houses that resist to fire and earthquakes. :trust:
(http://www.editec.pt/imgs/servicos/servicos7/img1.jpg)
BTW in portugal, construction is a very low paid job so we get eastern European or black immigrants to do it.
-
I was working for BAE Systems in Rochester. They make army and military technologies like planes and stuff. They made the Eurofighter Typhoon!
-
BAE Systems Cydeside - royal navy contract for 2 years bulding T45 Destroyers and building parts of the 2 worlds biggest Aircraft carriers ;)
People say scotland doesn't do much :)
The future Aircraft Carriers for the Royal Navy, HMS Queen Elizabeth and HMS Prince of Wales, will be the largest and most powerful surface warships ever built in the UK. They will displace approximately 65,000 tonnes, a size between the USA's 100,000 tonne Nimitz class and the French 43,000 tonne Charles de Gaulle class aircraft carriers, and three times larger than the Invincible class carriers.
The carrier will have a maximum speed of 25 knots. At 15 knots the range will be 10,000 nautical miles and the ship carries food, fuel and stores for an endurance of seven days between replenishments. Each ship will have a complement of typically 1,200, including 600 aircrew.
FAC will be the principal platform for the RN/RAF Future Joint Combat Aircraft (FJCA) which will replace RN and RAF Harriers; the FJCA role will be filled by the STOVL (short take off vertical landing) variant of the Lockheed Martin F35 Joint Strike Fighter (JSF).
In order to maximise the flexibility that CVF can offer over its potential 50 year service life, the carriers will be built to an innovative adaptable design. Although CV-based, the ships will initially be fitted with a ramp for STOVL operations. Post JSF, the design will be capable of modification to operate aircraft requiring a catapult launch and arrested recovery. Although the final dimensions of CVF have yet to be confirmed, initial indications suggest that the carriers could be the largest warships ever built for the Royal Navy. The base port will be Portsmouth, Hampshire.
BAE Systems is a member of the Carrier Alliance and we play a leading role in delivering this programme.